With our development toolkits you can integrate IO-Link Wireless technology into your devices in the most flexible way. Our toolkits are available for both Master and Device development.
Technologically, KUNBUS has chosen the CC265x microcontroller from Texas Instruments for IO-Link Wireless. Compared to other microcontrollers on the market, the CC265x offers high performance at very low power consumption. This allows potential applications with energy self-sufficient sensors, which are also covered by the IO-Link Wireless standard. The integrated ARM-based application controller enables a single-chip design without separate controllers. The hardware footprint and costs can thus be significantly reduced.
Thanks to the exact synchronization of the single radios, the IO-Link Wireless Master stack supports the implementation of 5 tracks with 40 connected Devices (sensors or actuators). Up to 3 Masters shall be able to communicate with up to 120 Devices at the same time within one RF area. The maximum distance between Master and Device is up to 20 meters. For a seamless integration of an IOLink Wireless Master into the superordinate fieldbus or industrial Ethernet level, KUNBUS also offers various interface solutions for all common industrial network protocols, such as PROFINET, EtherNet/IP and EtherCAT.
IO-Link Wireless Development Toolkit - 5 Track Master
Our Toolkit for IO-Link Wireless Master integration consists of the following components and services:
- IO-Link Wireless Master stack as binary, including the lower layers (MAC/PHY) based on the Simple Link™ CC2650
- 1 x Evaluation Board with ten CC2650 PCB modules and one Sitara™ AM4379 processor
- TI Sitara™ based sample project
- Detailed documentation, inclusively hardware schematics
- Development support (6 months)
- Optional: Feldbus / IE Development Toolkit for Sitara™ processor

IO-Link Wireless Development Toolkit - Device

Our Toolkit for IO-Link Wireless device integration consists of the following components and services:
- IO-Link Wireless Device stack as binary, including the lower layers (MAC/PHY) based on the Simple Link™ CC2650
- 1 x TI SimpleLink™ CC2650 wireless MCU LaunchPad™
- 1 x Test & Reference Board incl. IO-LINK Wireless Device Module KE2640MODA1
- 1 x IO-Link Wireless Master Board USB
- CC2650 based sample project
- Detailed documentation, inclusively hardware schematics
- Development support (6 months)
Downloads & Infos
Article | Article No. |
---|---|
IO-Link Wireless Development Toolkit – 5 Track Master | 100288 |
IO-Link Wireless Development Toolkit – Device | 100296 |