Home > Embedded Modules > KUNBUS-COM Modules > EtherCAT embedded module KUNBUS-COM


Powerful communication module for EtherCAT networks

KUNBUS-COM Interface Module EtherCAT


  • Dimensions (LxWxH): 85 x 65 x 12 mm
  • Power supply: 3.3 V
  • Configurable via Modbus RTU
  • Uniform pin-out to the application
  • ERNI SMC plug connector to the application
  • Modules have been tested and certified
  • Galvanic separation of bus and application up to 1.5 kV
  • Low power consumption
  • Parameter changes during operation
  • CDI service interface (config, debug, status)
  • The indication LEDs are integrated on the circuit board
  • RJ45, M12 industrial Ethernet plug
  • ETC certified


Application interface by choice via:

  • SDI Modbus interface to the application
  • Automatic Baud rate recognition
  • UART, RS485, RS232
  • Protocolscripter
  • Complete function access possible
  • Dual port RAM interface
  • SSC shift register interface (SPI)
  • Automatic Baud rate recognition
  • Automatic shift register recognition
  • Function test during operation

Environmental Conditions

  • Operating temperature: 0°C to +60°C
  • Storage temperature: -40°C to +85°C
  • Humidity: 0% to 95%, non-condensing
  • Condensing: not allowed
  • Mechanical shock load: 15G
  • Permanent mechanical stress: 5G
Article: Article Number:
KUNBUS-COM EtherCAT Slave 100033


KUNBUS-COM EtherCAT User Manual
KUNBUS-COM EtherCAT Certificate

Our KUNBUS-COM communication interfaces have been created as an evolution of the KUNBUS-IC family. The COM modules EtherCAT (Ethernet, EtherCAT slave) are equipped with plug-in connectors for bus connection, optoelectronic couplers, memory, a microcontroller, bus drivers and a SMC plug with 32 pins to control the application.

Furthermore, the KUNBUS-COM EtherCAT can be connected by cable or simply by plugging to the control card. Because of the uniform pin-out of all COM modules, they can be replaced easily by other variants (for example PROFINET, Ethernet/IP, etc.). Accordingly, they can be used as EtherCAT option cards.

Contact Button