Home > Embedded Modules > KUNBUS-COM Modules > CC-Link embedded module KUNBUS-COM

CC-Link KUNBUS-COM

Powerful communication module for CC-Link networks

KUNBUS-COM Interface Module CC-Link

Specifications

  • Low power consumption
  • Voltage supply 3.3 V
  • CDI service interface (config, debug, status)
  • RS232, RS485, UART
  • Modbus RTU
  • Protocolscripter
  • Parameter changes can be made during operation
  • LEDs integrated on the circuit board
  • Fieldbus plug (DSUB 9)
  • Uniform pin-out to the application
  • Freely configurable via Modbus RTU and terminal
  • Galvanic separation (1.5 kV) of application and bus
  • ERNI SMC with 32 pins as plug-in connector to the application
  • 100 % tested and CLPA-certified modules
  • External dimensions 85 x 65 mm

 

following application interfaces can be selected:

  • Dual port RAM interface
  • SSC shift register interface (SPI)
  • Function test during operation
  • Automatic Baud rate recognition
  • Automatic shift register recognition
  • SDI Modbus interface to the application
  • RS485 / UART
  • Complete access to all functions
Article: Article Number:
KUNBUS-COM CC-Link Slave 100043

 

Downloads
KUNBUS-COM CC-Link User Manual
other CC-Link modules: Article Number:
KUNBUS-IC CC-Link Slave / 3.3 V 100082
KUNBUS-IC CC-Link Slave / 5 V 100040
Customized CC-Link Module --

 

The communication interfaces in the construction form KUNBUS-COM were created as an evolution stage to the KUNBUS-IC modules. The version CC-Link includes optoelectronic couplers, bus drivers, microcontrollers, and memory, but also an SMC plug with 32 pins to control or application, as well as plug-in connectors for bus connection.

The connection of the COM module CC-Link is realized either via a cable or simply by plugging onto the control card. Because of the uniform pin-out of all COM modules, they can be replaced easily by other variants (for example DeviceNet, PROFIBUS , etc.). It then serves as CC-Link option card.

Contact Button