CANopen KUNBUS-COM

Powerful communication module for CANopen networks

KUNBUS-COM Interface Module CANopen

Specifications

  • Dimensions (LxWxH): 85 x 65 x 12 mm
  • Power supply: 3.3 V
  • Low power consumption
  • Parameter changes during operation are possible
  • CDI service interface (config, debug, status)
  • Freely configurable via Modbus RTU and terminal
  • One pin-out to the application
  • 1.5 kV galvanic separation between bus and application
  • Plug-in connector to the application (ERNI SMC with 32 pins)
  • Modules are subjected to 100 % tests and CIA certification
  • LEDs are integrated on the circuit board
  • Fieldbus plug DSUB 9

 

Application interface by choice via:

  • SSC shift register interface (SPI)
  • Automatic shift register recognition
  • Automatic Baud rate recognition
  • Interface to the application (SDI Modbus)
  • UART, RS485, RS232 interface
  • Dual port RAM interface
  • Protocolscripter

Environmental Conditions

  • Operating temperature: 0°C to +60°C
  • Storage temperature: -30°C to +85°C
  • Humidity: 0% to 95%, non-condensing
  • Condensing: not allowed
  • Mechanical shock load: 15G
  • Permanent mechanical stress: 5G
Legacy product. No longer available.
Article: Article Number:
KUNBUS-COM CANopen Slave discontinued

 

Downloads
KUNBUS-COM Flyer
KUNBUS-COM CANopen User Manual
KUNBUS-COM CANopen EDS File
KUNBUS-COM CANopen Certificate
other CANopen modules: Article Number:
KUNBUS-IC CANopen Slave / 3.3 V discontinued
KUNBUS-IC CANopen Slave / 5 V discontinued
Customized CANopen Module --

 

The KUNBUS-COM communication interfaces were developed based on the development of the KUNBUS-IC family. The version CANopen (Control Area Network) includes memory, optoelectronic couplers, microcontrollers and bus drivers, but also an SMC plug with 32 pins to control or application, as well as plug-in connectors for bus connection.

The COM module CANopen can be connected conveniently with a cable or by plugging in to the control card. Because of the uniform pin-out of all COM modules, they can be replaced easily by other variants (for example DeviceNet, PROFIBUS , etc.). Accordingly, they can be used as CANopen option cards.